View B39182B8018P810_8387771.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

saw components saw duplexer for smallcell band 3 (3g/lte) series/type: ordering code: b8018 B39182B8018P810 date: version: february 25, 2015 2.1 ? epcos ag 2015. reproduction, publicati on and dissemination of this publicatio n, enclosures hereto and the information contained therein without epcos' pr ior express consent is prohibited. epcos ag is a tdk group company.
2 february 25, 2015 b8018 1747.5 / 1842.5 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet application n low-loss saw duplexer for lte smallcell systems (band 3) n low insertion attenuation n high power durability n industrial qualification n usable passband 75 mhz n rx = uplink = 1710-1785 mhz n tx = downlink = 1805-1880 mhz features n package size 2.5 * 2.0 * 0.5 mm 3 n max. package height 0.5 mm n rohs compatible n package for s urface m ount t echnology ( smt ) n ni, au-plated terminals n e lectrostatic s ensitive d evice ( esd ) n moisture sentivity level 3 pin configuration n 3 rx output n 1 tx input n 6 antenna n 2, 4, 5, 7, 8, 9 to be grounded 6 2 5,7,8 1,3 4 13 6 4,5,9 2,7,8
3 february 25, 2015 b8018 1747.5 / 1842.5 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. characteristics temperature range for specification: t = C10 ?c to +85 ?c antenna terminating impedance: z ant =50 w || 3.6 nh rx terminating impedance: z rx =50 w|| 9.1 nh tx terminating impedance: z tx =50 w || 8.2 nh characterisitcs ant - rx min. typ. @ 25 ?c max. center frequency f c 1747.5 mhz maximum insertion attenuation a max 1710.0 ... 1785.0 mhz - 3.5 5.3 db 1745.0 ... 1775.0 mhz - 2.5 3.0 db amplitude ripple (p-p) da 1710.0 ... 1785.0 mhz - 2.2 4.0 db 1745.0 ... 1775.0 mhz - 1.0 1.5 db error vector magnitude evm 1) 1) error vector magnitude (evm) based on definition given in 3gpp ts 25.141 @ f carrier 1712.5 ... 1783.5 mhz - 2.5 4.0 % input vswr (ant port) 1710.0 ... 1785.0 mhz - 1.6 2.0 output vswr (rx port) 1710.0 ... 1785.0 mhz - 1.8 2.2 attenuation a 10.0 ... 1500.0 mhz 40 49 - db 1500.0 ... 1660.0 mhz 40 48 - db 1660.0 ... 1690.0 mhz 10 15 - db 1805.0 ... 1840.0 mhz 40 44 - db 1840.0 ... 1880.0 mhz 43 47 - db 1880.0 ... 2400.0 mhz 40 45 - db 2400.0 ... 2500.0 mhz 40 45 - db 2500.0 ... 3490.0 mhz 35 50 - db 3490.0 ... 3550.0 mhz 35 51 - db 3500.0 ... 5235.0 mhz 35 42 - db 5235.0 ... 5325.0 mhz 35 42 - db
4 february 25, 2015 b8018 1747.5 / 1842.5 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet characteristics temperature range for specification: t = C10 ?c to +85 ?c antenna terminating impedance: z ant =50 w || 3.6 nh rx terminating impedance: z rx =50 w|| 9.1 nh tx terminating impedance: z tx =50 w || 8.2 nh characterisitcs tx - ant min. typ. @ 25 ?c max. center frequency f c 1842.5 mhz maximum insertion attenuation a max 1805.0 ... 1880.0 mhz - 2.6 4.0 db 1840.0 ... 1870.0 mhz - 1.7 2.5 db amplitude ripple (p-p) da 1805.0 ... 1880.0 mhz - 1.2 3.0 db 1840.0 ... 1870.0 mhz - 0.3 1.0 db error vector magnitude evm 1) 1) error vector magnitude (evm) based on definition given in 3gpp ts 25.141 @ f carrier 1807.5 ... 1877.5 mhz - 1.6 3.5 % input vswr (tx port) 1805.0 ... 1880.0 mhz - 1.4 2.0 output vswr (ant port) 1805.0 ... 1880.0 mhz - 1.5 2.0 attenuation a 10.0 ... 1710.0 mhz 30 34 - db 1710.0 ... 1745.0 mhz 42 46 - db 1745.0 ... 1780.0 mhz 45 49 - db 1780.0 ... 1785.0 mhz 35 48 - db 1900.0 ... 1911.0 mhz 5 18 - db 1911.0 ... 1920.0 mhz 20 63 - db 1920.0 ... 1980.0 mhz 40 45 - db 1980.0 ... 2400.0 mhz 35 40 - db 2400.0 ... 2500.0 mhz 35 41 - db 2500.0 ... 3680.0 mhz 30 41 - db 3680.0 ... 3740.0 mhz 30 49 - db 3740.0 ... 5150.0 mhz 30 38 - db 5150.0 ... 5725.0 mhz 25 33 - db
5 february 25, 2015 b8018 1747.5 / 1842.5 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. characteristics temperature range for specification: t = C10 ?c to +85 ?c antenna terminating impedance: z ant =50 w || 3.6 nh rx terminating impedance: z rx =50 w|| 9.1 nh tx terminating impedance: z tx =50 w|| 8.2 nh maximum ratings characteristics tx-rx min. typ. @ 25 ?c max. attenuation a 1710.0 ... 1745.0 mhz 43 46 - db 1745.0 ... 1780.0 mhz 45 49 - db 1780.0 ... 1785.0 mhz 37 49 - db 1805.0 ... 1840.0 mhz 40 43 - db 1840.0 ... 1880.0 mhz 45 48 - db storage temperature range t stg C40/+85 ?c dc voltage v dc 0 v esd voltage v esd 50 1) 1) according to jesd22-a115a (machine model), 1 negative and 1 positive pulses. v machine model, 1 pulse input power at pin 1 source and load impedance 50 w 1805.0 ...1880.0 mhz p in 27 2) 2) time to failure (ttf) according to accelerated power durability tests, and wear out models. dbm pin 27dbm average - 38 dbm peak lte 5 mhz downlink t = 55?c, 50.000 h elsewhere p in 10 dbm operating lifetime with output power at antenna source and load impedance 50 w 1805.0 ...1880.0 mhz p out tbc 3) 3) according to accelerated high temperature operating life (hotl) test. dbm continuous wave t=55?c, 100khrs }
6 february 25, 2015 b8018 1747.5 / 1842.5 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet frequency response ant-rx frequency response ant-rx
7 february 25, 2015 b8018 1747.5 / 1842.5 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. frequency response tx-ant frequency response tx-ant
8 february 25, 2015 b8018 1747.5 / 1842.5 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet frequency response tx-rx frequency response tx-rx
9 february 25, 2015 b8018 1747.5 / 1842.5 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. s11 vswr (rx) s22 vswr (ant) s33 vswr (tx)
10 february 25, 2015 b8018 1747.5 / 1842.5 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet evm rx evm tx
11 february 25, 2015 b8018 1747.5 / 1842.5 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. references type b8018 ordering code B39182B8018P810 marking and package c61157-a3-a27 packaging f61074-v8232-z000 date codes l_1126 s-parameters b8018_nb.s3p, b8018_wb.s3p see file header for port/pin assignment table soldering profile s_6001 rohs compatible rohs-compatible means that products are compatible with the requirements according to art. 4 (substance restrictions) of di- rective 2011/65/eu of the european parliament and of the council of june 8 th , 2011, on the restriction of the use of certain hazardous substances in electrical and electronic equipment ("directive") with due regard to the application of exemptions as per annex iii of the directive in certain cases. moldability before using in overmolding environment, please contact your epcos sales office. matching coils see inductor pdf-catalog http:// www .tdk.co.jp/tefe02/coil.htm#aname1 and data library for circuit simulation http://www.tdk.co.jp/etvcl/index.htm for further information please contact your local epcos sales office or visit our webpage at w ww.epcos.com . published by epcos ag systems, acoustics, waves business group p.o. box 80 17 09, 81617 munich, germany ? epcos ag 2015. this brochure replaces the previous edition. for questions on technology, prices and delivery please contact the sales offices of epcos ag or t he international representatives. due to technical requirements components may contain dangerous substances. for information on t he type in question please also contact one of our sales offices.
12 february 25, 2015 important notes t he following applies to all products named in this publication: 1. some parts of this publication contain statements about the suitability of our products for certain areas of application . these statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. we nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. as a rule, epcos is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. for these reasons, it is always ultimately incumbent on the customer to check and decide whether an epcos product with the properties described in the product speci?cation is suitable for use in a particular customer application. 2. we also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as speci?ed. in customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. the warnings, cautions and product-speci?c notes must be observed. 4. in order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous) . useful information on this will be found in our material data sheets on the internet (www.epcos.com/material). should you have any more detailed questions, please contact our sales of?ces. 5. we constantly strive to improve our products. consequently, the products described in this publication may change from time to time . the same is true of the corresponding product speci?cations. please check therefore to what extent product descriptions and speci?cations contained in this publication are still applicable before or when you place an order. we also reserve the right to discontinue production and delivery of products . conse- quently, we cannot guarantee that all products named in this publication will always be available. the aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-speci?c products. 6. unless otherwise agreed in individual contracts, all orders are subject to the current version of the general terms of delivery for products and services in the electrical industry published by the german electrical and electronics industry association (zvei) . 7. the trade names epcos, alu-x, ceradiode, ceralink, cerapad, ceraplas, csmp, cssp, ctvs, deltacap, digisimic, dssp, exocore, filtercap, formfit, leaxield, miniblue, minicell, mkd, mkk, motorcap, pcc, phasecap, phasecube, phasemod, phicap, pqsine, siferrit, sifi, sikorel, silvercap, simdad, simic, simid, sineformer, siov, sip5d, sip5k, tfap, thermofuse, windcap are trademarks registered or pending in europe and in other countries. further information will be found on the internet at www.epcos.com/trademarks.

▲Up To Search▲

Price & Availability of B39182B8018P810

	To Download B39182B8018P810 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .